485Mbe4001
10-24 01:25 PM
Ignore the IOs, just talk to your Senator or Congressman. They will be able to help you out. I was stuck in name check for more than 3 years. My congressman did not help but the senators office had a namecheck cell and they help out with genuine cases. The person there helped me clear my name check in 2-3 months (talk, dont email, send certified letter with details after talking to them). Had i known this earlier I would have had contacted them earlier and would have gotten my GC in June 07. My lawyer sdid not allow us to contact the IOs for information and i suffered big time because of that. Based on my experience all i can say is be proactive.
I don't know if my NC is cleared. Tried to find it couple of times calling over phone but always ran into unfriendly IO officers.
Got out of BEC in dec 2006, I140 cleared in Jan 2007 but then my PD became current only in June 2007. And due to laziness of my law firm, my I-485 filing did not happen in June and got dragged into July 07 mess.
I think if USCIS had initiated my Namecheck as per normal timeline (sometime around when my I-485 filed , i.e anywhere between July - Sep 2007), then yes, I think it crossed 180 days long time back.
I don't know if my NC is cleared. Tried to find it couple of times calling over phone but always ran into unfriendly IO officers.
Got out of BEC in dec 2006, I140 cleared in Jan 2007 but then my PD became current only in June 2007. And due to laziness of my law firm, my I-485 filing did not happen in June and got dragged into July 07 mess.
I think if USCIS had initiated my Namecheck as per normal timeline (sometime around when my I-485 filed , i.e anywhere between July - Sep 2007), then yes, I think it crossed 180 days long time back.
wallpaper eminem tattoos of hailie.
angelfire76
01-03 02:31 PM
yes..agreed. But you are forgeting all the new EAD's (H4's) who will be part of the mix.
You have to compete with H4s on EAD (I might be generalizing here so apologies to anyone offended) you've got more serious issues than you have foreseen.
EAD is not a ticket to a high-paying job requiring a certain level of skill.
I feel this thread is going the way of a Programmer's guild forum in that "Now that I'm in the door, stop the offshoring" :D
You have to compete with H4s on EAD (I might be generalizing here so apologies to anyone offended) you've got more serious issues than you have foreseen.
EAD is not a ticket to a high-paying job requiring a certain level of skill.
I feel this thread is going the way of a Programmer's guild forum in that "Now that I'm in the door, stop the offshoring" :D
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
2011 eminem daughter hailie jade.
bujjigadu123
02-22 03:31 PM
Hi
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
Further to my above post, I have following questions
1) Once the client side project is completed (assuming the employer is paying to employee), how much period we can stay waiting for a new project? Is there any limit of the period?
2) Once the pay from an employer is stopped, with in how much period, one has to go to home country? Is there any limit?
3) Can an employee stay (assuming he is getting paid) with out client side project and working on skill upgrade and waiting for a new project?
4) What are the documents I should be ready with? I am staying with my family.
I have following documents with me:
a) LCA,
b) Passport for me and my family
c) valid visa recently stamped for me and for family
d) approval notice,
e) employment offer letter,
f) clinet appreciation letters print outs,
g) past experience letters,
h) all pay stubs for my period of stay in USA.
Please reply.
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
Further to my above post, I have following questions
1) Once the client side project is completed (assuming the employer is paying to employee), how much period we can stay waiting for a new project? Is there any limit of the period?
2) Once the pay from an employer is stopped, with in how much period, one has to go to home country? Is there any limit?
3) Can an employee stay (assuming he is getting paid) with out client side project and working on skill upgrade and waiting for a new project?
4) What are the documents I should be ready with? I am staying with my family.
I have following documents with me:
a) LCA,
b) Passport for me and my family
c) valid visa recently stamped for me and for family
d) approval notice,
e) employment offer letter,
f) clinet appreciation letters print outs,
g) past experience letters,
h) all pay stubs for my period of stay in USA.
Please reply.
more...
satishku_2000
07-13 03:49 PM
Should we be worried about the DREAM ACT?
Only if you have kids who are old enough ot age out ... I dont have kids but I can support the bill if the bill caters to dreams of legal kids too ..
Only if you have kids who are old enough ot age out ... I dont have kids but I can support the bill if the bill caters to dreams of legal kids too ..
Gravitation
07-06 08:38 PM
^^^
more...
TomPlate
02-28 01:47 PM
NSC is curretly processing EB I-485 cases filed before July 30, 2007. TSC - cases filed before April 10, 2007. So according to the USCIS policy: "If at any point your case should become more than 30 days outside our normal processing time, and you haven't received a written decision or update from us within the last 60 days, you can help us by calling customer service and letting us know. We will research your case, see what needs to be done to get it processed, and get back to you with an explanation."
I.e. NSC cases filed before July 1st are considered outside of processing time. The USCIS explains it in the latest name check FAQ posted today.
Can you please let us know the URL for the latest name check FAQ posted today.
I.e. NSC cases filed before July 1st are considered outside of processing time. The USCIS explains it in the latest name check FAQ posted today.
Can you please let us know the URL for the latest name check FAQ posted today.
2010 images eminem daughter hailie
mhssatya
01-28 08:52 AM
Sad to see students being punished like this. They are just taking advantage of the system and make some money, but not doing anything illegal. That's what we are all here for right? Make some money. If enrolling for F1 and working somewhere else is against rules, then why did USCIS issue F1 and CPT to the students.
Sorry all, i couldn't find video in english. But the video says it all.
Chip locks which are normally used against terrorists and criminals are used
on students of tri valley univeristy.
It's a human rights, privacy issue at it's peak..
It's heart breaking to see like this..
There may be scam from students, university but it's also problem from consulate, USCIS etc.
This is ridiculous..
YouTube - AP students face US deportation (http://www.youtube.com/watch?v=RxFHw56fTwE&feature=player_embedded)
Sorry all, i couldn't find video in english. But the video says it all.
Chip locks which are normally used against terrorists and criminals are used
on students of tri valley univeristy.
It's a human rights, privacy issue at it's peak..
It's heart breaking to see like this..
There may be scam from students, university but it's also problem from consulate, USCIS etc.
This is ridiculous..
YouTube - AP students face US deportation (http://www.youtube.com/watch?v=RxFHw56fTwE&feature=player_embedded)
more...
lotus26
05-30 07:09 PM
Done
hair eminem and hailie jade 2010.
bbct
04-22 11:00 AM
I copied your content to post on the whitehouse.gov website. Thank you.
Emailed the same also to my local Congresswomen.
Posted the letter to whitehouse address with the following contents:
"I am writing to inform you of how the country based quotas imposed on Employment Based green cards are unfair and illogical. I came to the US with the belief that this country is a meritocracy where you are judged based on your abilities and qualities. These country based quotas judge people based on their place of birth. This causes people from India and China to wait over a decade to get a green card whereas someone from another country with similar or lesser abilities can obtain permanent residence in a fraction of that time. Lack of permanent residency has made me hesitant to buy a house or to do any long term investments in US and I want to get out of this limbo at the earliest.
My requests to you are:
1. Eliminate country level quota on Green Cards (to reduce the backlog of permanent resident applicants)
2. Recapture unused permanent visa numbers from the past (to allow USCIS to issue permanent visas to eligible applicants whose applications have been processed and pre-adjudicated)
3. Issue 5-year EAD cards (to reduce workload on USCIS of administrative renewals)
4. Issue 5-year Advanced Parole document (to allow people like me stuck in the backlog to travel back and forth from USA without having to renew AP every year)
I believe in President's slogan "Yes, we can!"."
Emailed the same also to my local Congresswomen.
Posted the letter to whitehouse address with the following contents:
"I am writing to inform you of how the country based quotas imposed on Employment Based green cards are unfair and illogical. I came to the US with the belief that this country is a meritocracy where you are judged based on your abilities and qualities. These country based quotas judge people based on their place of birth. This causes people from India and China to wait over a decade to get a green card whereas someone from another country with similar or lesser abilities can obtain permanent residence in a fraction of that time. Lack of permanent residency has made me hesitant to buy a house or to do any long term investments in US and I want to get out of this limbo at the earliest.
My requests to you are:
1. Eliminate country level quota on Green Cards (to reduce the backlog of permanent resident applicants)
2. Recapture unused permanent visa numbers from the past (to allow USCIS to issue permanent visas to eligible applicants whose applications have been processed and pre-adjudicated)
3. Issue 5-year EAD cards (to reduce workload on USCIS of administrative renewals)
4. Issue 5-year Advanced Parole document (to allow people like me stuck in the backlog to travel back and forth from USA without having to renew AP every year)
I believe in President's slogan "Yes, we can!"."
more...
pbojja
04-24 03:06 PM
Sandy ,Simply Insane man , write a letter to white house and try to get some attention.This is completely ridiculous and definetley we need to do some thing .. I dont know what is left in this country , And they care more about illegal immigrants ..stupid tv news and news readers , hope one day they realise about legal immigration when we all are eligible to vote in this country
hot Hailie Jade Scott *2010*
vishwak
11-12 09:13 AM
Pederson Immigration Law Group, P.C. - December 2010 Visa Bulletin Sneak Preview! (http://www.usvisainfo.com/content/view/192/31/)
What does this mean???
What does this mean???
more...
house eminem hailie Apr official
rdehar
07-17 11:25 AM
Hey Guys, I don't know how many of you know about this link, but you can find out how your case is going and when it is supposed to be approved:
http://www.immigrationwatch.com/immi_predict_form.jsp
Gives me a peace of mind knowing how many cases filed around my date are approved ...
http://www.immigrationwatch.com/immi_predict_form.jsp
Gives me a peace of mind knowing how many cases filed around my date are approved ...
tattoo house eminem daughter hailie
sbeyyala
05-22 03:44 PM
I guess this bill passage is a trigger to all skilled workers to do the following.
Option-1: Become Illegal and get a Z visa.
Options-2: Go back to home land and live with dignity and peace of mind. (This is the option I would take). I am thankfully to the congress for helping me to make a decision, rather then wait for life time.
Options-3: Re-apply in merit based system and wait in line for 4 to 5 years, until some other similar bill comes and says you to restart again in some other system.
Option-1: Become Illegal and get a Z visa.
Options-2: Go back to home land and live with dignity and peace of mind. (This is the option I would take). I am thankfully to the congress for helping me to make a decision, rather then wait for life time.
Options-3: Re-apply in merit based system and wait in line for 4 to 5 years, until some other similar bill comes and says you to restart again in some other system.
more...
pictures eminem daughter hailie and
vin13
06-24 07:08 PM
Firstly, I'm a supporter of CIR...but I still sense some ambiguity in these lines...
may be it's just me...:)
"Legislation must also create mechanisms to attract high-skilled immigrants, control the flow of low-skilled immigrants and protect native-born workers, Schumer said, without providing specifics"
The specific details is what we are all waiting for. CIR seems to be the only way to expect some change for EB. We need to work for this change to be a good one for us.
may be it's just me...:)
"Legislation must also create mechanisms to attract high-skilled immigrants, control the flow of low-skilled immigrants and protect native-born workers, Schumer said, without providing specifics"
The specific details is what we are all waiting for. CIR seems to be the only way to expect some change for EB. We need to work for this change to be a good one for us.
dresses eminem and hailie jade 2010.
PD_Dec2002
06-19 02:24 PM
Yeah, how would I get the letter if he is not willing to.
Employer letter is not required if you are attaching photocopies of two current pay stubs.
Thanks,
Jayant
Employer letter is not required if you are attaching photocopies of two current pay stubs.
Thanks,
Jayant
more...
makeup Eminem T In The Park 2010
illinois_alum
10-02 04:40 PM
Thx so much I got it..
For the "Class of ADmission" - if I have entered US on AP, do I enter "Parolee"
Yes - you should enter PAROLEE as status if you last entered the US on an AP document
For the "Class of ADmission" - if I have entered US on AP, do I enter "Parolee"
Yes - you should enter PAROLEE as status if you last entered the US on an AP document
girlfriend 2010 eminem hailie tattoo.
Michael chertoff
10-26 04:11 PM
Another news making. Advice to all of Youngster Indians and Indians here by the India's outsourcing chop shop IT messihah Infosys Chief.
Don't look at IT industry as means to settle abroad: Narayana Murthy - The Economic Times (http://economictimes.indiatimes.com/tech/ites/Dont-look-at-IT-industry-as-means-to-settle-abroad-Murthy/articleshow/6815589.cms)
Mr. Sakthisagar, You are correct. we need people like you. you are so concerned about INDIA. please let me know How can I help.
BTW only Narendra Modi can solve this issue too.
MC
Don't look at IT industry as means to settle abroad: Narayana Murthy - The Economic Times (http://economictimes.indiatimes.com/tech/ites/Dont-look-at-IT-industry-as-means-to-settle-abroad-Murthy/articleshow/6815589.cms)
Mr. Sakthisagar, You are correct. we need people like you. you are so concerned about INDIA. please let me know How can I help.
BTW only Narendra Modi can solve this issue too.
MC
hairstyles eminem kim hailie. eminem kim.
paskal
07-17 02:01 AM
but even with this big announcement tomorrow, we still only have 140,000 visas and keep in mind USCIS has just been averaging about 100,000 per year. (so about 40,000 get wasted every year)
All all this does is to push the bottleneck further down the pipeline.
the only benefit I see is that it helps with filing of AP and EAD which does not help someone like me with my 485 already pending
Sorry I dont share the enthusisam
jasguil
of course it's a band aid
important to maintain perspective.
the fight is not over, whatever happens tomorrow.
our goals remain to be met and we must continue this work.
All all this does is to push the bottleneck further down the pipeline.
the only benefit I see is that it helps with filing of AP and EAD which does not help someone like me with my 485 already pending
Sorry I dont share the enthusisam
jasguil
of course it's a band aid
important to maintain perspective.
the fight is not over, whatever happens tomorrow.
our goals remain to be met and we must continue this work.
sledge_hammer
06-26 02:29 PM
The photos I got from CVS was not bright enough. So the guy brightened the photos for me. Now the photos look a little touched up ...
What are considered bad photos?
I guess MOST of the people are concerned about the quality of photos than $ spent. My friend had RFE because the photos he got from CVS were not upto USCIS specifications. So any + experience is valuable to the forum.
Cheers..
What are considered bad photos?
I guess MOST of the people are concerned about the quality of photos than $ spent. My friend had RFE because the photos he got from CVS were not upto USCIS specifications. So any + experience is valuable to the forum.
Cheers..
bailoor
01-15 02:47 PM
First of all, we would like to know whether your wife is pregnant or you are trying to know all the possible option for pregnancy.
If you are trying to know the option,
1) you can choose any individual health insurance provider(like blue cross or Aetna or State Farm etc) with maternity option. They expect to have coverage for 18 months before they accept any claims on maternity.
2) Also, ensure that the health insurance provider is coverage in complete US. Some of them have coverage only in west coast or tri state or midwest etc. In case of IT job, we can relcoate anywhere in US.
If pregnant, try these options.
a) Try to change to another employer who have GROUP HEALTH INSURANCE. Group health insurance cover pre-existing condition and hence no need to worry. Take HIGH premium option so that out-of-pocket is less and your expenses are less.
b) If you cannot change the employer, visit the reasonable cost hospitals around your neighbourhood , talk to the billing staff and ask for discounts. Usually, they give 30% discounts on the total cost. Otherwise, you can talk to the management staff(or write a letter) and get around 30-40% discount.
c) Ensure that you always visit the hospital, doctors, ob/gyn who are covered under your insurance provide network. Though your wife is not covered under maternity, they will work with their network doctor to get the discounted rate. Once you get that rate, ask for additional discount. Surely, you will get around 20-30% discount.
d) Based on my experience, here are the expenses cost....
ob/gyn - around 8k (prenatal to delivery)
pediatrician - around 1k ( from child birth to 2 month)
delivery expenses - around 8k (normal delivery)
- around 18 k ( c section)
scanning expenses - around 3k( depends on the conditions - sometimes, they
expect weekly scanning during 9th month).
Govt provides financial aid provide the total house income is less than 25k which
will not work for any IT professional.
As the expenses are HIGH, join some GOOD company for atleast 2 months, get their group health insurance and then quit and come back to your original company. After you
quit that company, you can use the COBRA option and get the maternity coverage.
GOOD LUCK...
If you are trying to know the option,
1) you can choose any individual health insurance provider(like blue cross or Aetna or State Farm etc) with maternity option. They expect to have coverage for 18 months before they accept any claims on maternity.
2) Also, ensure that the health insurance provider is coverage in complete US. Some of them have coverage only in west coast or tri state or midwest etc. In case of IT job, we can relcoate anywhere in US.
If pregnant, try these options.
a) Try to change to another employer who have GROUP HEALTH INSURANCE. Group health insurance cover pre-existing condition and hence no need to worry. Take HIGH premium option so that out-of-pocket is less and your expenses are less.
b) If you cannot change the employer, visit the reasonable cost hospitals around your neighbourhood , talk to the billing staff and ask for discounts. Usually, they give 30% discounts on the total cost. Otherwise, you can talk to the management staff(or write a letter) and get around 30-40% discount.
c) Ensure that you always visit the hospital, doctors, ob/gyn who are covered under your insurance provide network. Though your wife is not covered under maternity, they will work with their network doctor to get the discounted rate. Once you get that rate, ask for additional discount. Surely, you will get around 20-30% discount.
d) Based on my experience, here are the expenses cost....
ob/gyn - around 8k (prenatal to delivery)
pediatrician - around 1k ( from child birth to 2 month)
delivery expenses - around 8k (normal delivery)
- around 18 k ( c section)
scanning expenses - around 3k( depends on the conditions - sometimes, they
expect weekly scanning during 9th month).
Govt provides financial aid provide the total house income is less than 25k which
will not work for any IT professional.
As the expenses are HIGH, join some GOOD company for atleast 2 months, get their group health insurance and then quit and come back to your original company. After you
quit that company, you can use the COBRA option and get the maternity coverage.
GOOD LUCK...
No comments:
Post a Comment