javadeveloper
07-21 12:44 AM
thanks tinamatthew for your time and answers,
yeah it's fair law for those who re enters into usa , but not for those who lived in US for many years and have few gaps in employment.Anyhow it's a real scenario and it's my case.I gave all W2s to my company and I am not sure whether they submitted all the W2s or not , I need to check with them.I am much worried about how to proceed if my company sends all w2s to CIS and if CIS sends me RFE/NOID.I am also in dilemma to whether to consult any lawyer or not (My company uses corporate lawyers and I can't contact them directly) , even if contact any good lawyer , I am not sure if i have any options left.There are many unanswerd questions :mad: .Thanks again.
yeah it's fair law for those who re enters into usa , but not for those who lived in US for many years and have few gaps in employment.Anyhow it's a real scenario and it's my case.I gave all W2s to my company and I am not sure whether they submitted all the W2s or not , I need to check with them.I am much worried about how to proceed if my company sends all w2s to CIS and if CIS sends me RFE/NOID.I am also in dilemma to whether to consult any lawyer or not (My company uses corporate lawyers and I can't contact them directly) , even if contact any good lawyer , I am not sure if i have any options left.There are many unanswerd questions :mad: .Thanks again.
wallpaper the cutest puppy ever. by
daniel_leavitt2000
February 15th, 2004, 05:29 PM
I have a Sony DSC F717. I got it to photograph model trains, so it is almost lways in macro mode. Frequently, the image blurs toawrds the back, even when set at the highest F-stop. The subject is usially about 5-12 inches away from the camera, depending on the model I am photographing. The models are about an inch high and up to 10 inches long.
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
wleebrown
November 14th, 2007, 07:26 AM
Keith,
My sensors always seem to be dust magnets ... probably because I shoot with mostly primes and switch lenses a lot outdoors and in places that the lens just probably shouldn't be off the camera.
The site Mats recommends looks like it might have some good instructions, but the best advice I've been given was buy a Rocket blower (it's just a big bulb type blower that's shaped like a rocket for about $20). Most of the time 3 or 4 blasts of air with the rocket blower does the trick. (Never use canned air by the way.) And be careful how far you insert the end of the blower into your camera once the mirror is locked.
Shortly after buying a new 30D I got a little overzealous and smeared the end of the blower across the sensor. After pulling my heart back out of my feet, because I was certain I'd destroyed my new camera, and reading several sites like the one above, I violated all the rules and used standard cotton swabs my wife had in the bathroom (because it was the weekend and I live in the country where camera stores and medical supply shops are not close by or open) and I was able to easily clean the smear I had created across the sensor. The only problem I've had since was more dust.
It's kind of scary the first time, but in reality it is not brain surgery. If you use due care and the right kinds of material, you should have no problem removing the dust yourself. At $75 a cleaning, if I took my camera in every time I had a little dust I would have to give quit shooting.
Blessings,
Lee
My sensors always seem to be dust magnets ... probably because I shoot with mostly primes and switch lenses a lot outdoors and in places that the lens just probably shouldn't be off the camera.
The site Mats recommends looks like it might have some good instructions, but the best advice I've been given was buy a Rocket blower (it's just a big bulb type blower that's shaped like a rocket for about $20). Most of the time 3 or 4 blasts of air with the rocket blower does the trick. (Never use canned air by the way.) And be careful how far you insert the end of the blower into your camera once the mirror is locked.
Shortly after buying a new 30D I got a little overzealous and smeared the end of the blower across the sensor. After pulling my heart back out of my feet, because I was certain I'd destroyed my new camera, and reading several sites like the one above, I violated all the rules and used standard cotton swabs my wife had in the bathroom (because it was the weekend and I live in the country where camera stores and medical supply shops are not close by or open) and I was able to easily clean the smear I had created across the sensor. The only problem I've had since was more dust.
It's kind of scary the first time, but in reality it is not brain surgery. If you use due care and the right kinds of material, you should have no problem removing the dust yourself. At $75 a cleaning, if I took my camera in every time I had a little dust I would have to give quit shooting.
Blessings,
Lee
2011 Cutest Puppy Ever
sbnvs@yahoo.com
04-08 12:51 PM
Looks like demand data for May is out. Please check the following
http://www.travel.state.gov/pdf/EmploymentDemandUsedForCutOffDates.pdf
http://www.travel.state.gov/pdf/EmploymentDemandUsedForCutOffDates.pdf
more...
ttdam
10-02 04:08 PM
Hi gchopeful
Sorry to hear about denial
Was your case @ NSC/TSC ? EB2 or EB3 ?
Mine is A2P RFE as well from TSC !
Thank you
Sorry to hear about denial
Was your case @ NSC/TSC ? EB2 or EB3 ?
Mine is A2P RFE as well from TSC !
Thank you
kurtz_wolfgang
08-15 12:27 PM
Please Help Gurus....:confused::confused::confused:
more...
kingkon_2000
03-26 11:16 AM
I had my EB2 LC rejected and the reason that DOL gave was they were not able to contact the employer and/or employer did not respond to their correspondence. Lawyer gave me two option to refile (I will lose PD) or appeal. This was in 2005 when PERM had just started and the lawyers said they did not know how long the appeal process takes in PERM since it was new system. To cut the story short I received the approved LC within 45days of appeal, but my case was a simple one I think. Your case it a bit different but in no case an appeal should take 1.5 years at least in PERM.
2010 cutest puppy ever
Joey Foley
May 17th, 2005, 06:55 AM
There are several spots in the Indy area where you can get such a perspective. One with easy access is high atop Crown Hill cemetary (i.e., the James Whitcomb Riley hilltop gravesite). Sunrise or sunset would be your best bet unless you hit on a really crystal-clear day with no midday haze. You might find something close to what you are after around 16th and Georgetown road, too ;)
Awesome idea!
Anymore idea anyone while I'm out and about on my day off?;)
Awesome idea!
Anymore idea anyone while I'm out and about on my day off?;)
more...
Pagal
08-04 12:16 AM
Hello,
As EAD is not same like H1-B, you can not work if the old EAD expires and new one is not issued (see an attorney's reponse here (http://forum.freeadvice.com/immigration-9/ead-renewal-195657.html) and here (http://murthyforum.atinfopop.com/4/OpenTopic?a=tpc&s=1024039761&f=1474093861&m=7161084702)). If EAD application is pending for more than 90 days, then you can open a service request and request expedited approval (there have been cases where such requests resulted in EAD approvals within a week). It is worth a try to approach the local USCIS and request a temporary EAD, but as far as I know, USCIS has stopped issuing such temporary cards.
It is important that you do not work in-between the expiry date of old EAD and start date of new EAD, so it is better to ask for unpaid leave for such time, though there is no need to quit the job. If the work demands are heavy, you may want to continue working as per 245k (but you will have to pay 1000 USD as fine), see the discussion here (http://immigrationvoice.org/forum/forum5-all-other-green-card-issues/20566-new-245-k-memo-released-with-more-clarifications.html).
Good luck!
As EAD is not same like H1-B, you can not work if the old EAD expires and new one is not issued (see an attorney's reponse here (http://forum.freeadvice.com/immigration-9/ead-renewal-195657.html) and here (http://murthyforum.atinfopop.com/4/OpenTopic?a=tpc&s=1024039761&f=1474093861&m=7161084702)). If EAD application is pending for more than 90 days, then you can open a service request and request expedited approval (there have been cases where such requests resulted in EAD approvals within a week). It is worth a try to approach the local USCIS and request a temporary EAD, but as far as I know, USCIS has stopped issuing such temporary cards.
It is important that you do not work in-between the expiry date of old EAD and start date of new EAD, so it is better to ask for unpaid leave for such time, though there is no need to quit the job. If the work demands are heavy, you may want to continue working as per 245k (but you will have to pay 1000 USD as fine), see the discussion here (http://immigrationvoice.org/forum/forum5-all-other-green-card-issues/20566-new-245-k-memo-released-with-more-clarifications.html).
Good luck!
hair The cutest puppy..EVER!
gc_check
08-30 10:09 AM
for gg_ny
this is extension of H1B based of aproved I140 .
if i understood correctly the application for H1 extension will became null and void if i travel outside of US .
this is very interesting. I was not aware about this .
Anyway, thank you for your valuable input
I've also applied for the H1B extension(3yr Extn based on approved I-140) and was told NOT to travel while the case is still pending approval by my company Legal Dept/Attorney. So I requested to do it on premuim processing as there is a business necessity to do so. If there is a business need for you to travel, then your company should be willing to use Premium Processing. It costs $1000 more to the company to request Premuim Processing.
this is extension of H1B based of aproved I140 .
if i understood correctly the application for H1 extension will became null and void if i travel outside of US .
this is very interesting. I was not aware about this .
Anyway, thank you for your valuable input
I've also applied for the H1B extension(3yr Extn based on approved I-140) and was told NOT to travel while the case is still pending approval by my company Legal Dept/Attorney. So I requested to do it on premuim processing as there is a business necessity to do so. If there is a business need for you to travel, then your company should be willing to use Premium Processing. It costs $1000 more to the company to request Premuim Processing.
more...
glus
07-10 07:54 PM
I think employer should bear the full cost of H1B and H1B extension. It is illegal for the employer to get that money from employee.
This is not your business. We are here to help. If a person asks for advise, please provide it if you can. You comments may seem to be valid, but this is not what the user is asking for....
regards,
This is not your business. We are here to help. If a person asks for advise, please provide it if you can. You comments may seem to be valid, but this is not what the user is asking for....
regards,
hot cutest puppy ever.
amohale
03-12 07:52 PM
Anyone, please respond to my questions below.......... it will be a great help......
more...
house cutest puppy ever
GCBy3000
01-02 05:24 PM
This thread is for monthly contributors. Please make sure you post your this month contribution in this thread.
My $20 is on the way. Total of $240+ till date.
Below is the confirmation.
Immigration Voice
IV.ORG $ 20.00 01/09/07 62LMP-P2KVD
Memo: gcby3000
This memo will be sent with your payment
My $20 is on the way. Total of $240+ till date.
Below is the confirmation.
Immigration Voice
IV.ORG $ 20.00 01/09/07 62LMP-P2KVD
Memo: gcby3000
This memo will be sent with your payment
tattoo The cutest puppy ever!
gc_rip
08-10 08:53 PM
Oh you are talking about that 5658 one.. It's already been discussed in these forums. Someone pointed out that this was crafted by a senator who is about to retire, and has a co-sponsor from Hawaii. So it doesn't appear to be very strong and would most probably just die silently
Why can't democrats come up with a bill like this, good for EB immigration? And what would be a reason for Democrats to vote out this bill?
Why can't democrats come up with a bill like this, good for EB immigration? And what would be a reason for Democrats to vote out this bill?
more...
pictures Cutest Puppy Ever!
pdakwala
05-25 08:34 AM
Here is the list of phone numbers, fax numbers and emails. Sending fax only is not enough. Please call the senators and talk to their staff. Request them to oppose Bingaman's amendment. The script on talking point is available on the website. Please use that.
Cheers
Cheers
dresses Cutest puppy picture of Cooper
kumar1305
01-26 07:33 PM
Instead of all this country caps, applying for GC and waiting, why don't they get a rule like European countries? In UK, netherlands and Denmark it is very simple. All you have to do is prove that you made more money (ofcouse taxes count) than the stipulated amount by the government. Pay the taxes for 4 or 5 years and take the GC(Permanent Resident). Simple no lawyer no crap. Country benefits we benefit. I lived in UK for more than 3 years and I would have become a citizen by now. But never wanted to be in UK, it was only a stop over. I always loved America, don't know why? Do you think it is because of Hollywood? I'm kidding. But still I love this country. Hope things will change some day. If not my daughter will sponsor me when she turns 21.
more...
makeup I#39;m the best puppy ever!
GotFreedom?
07-23 05:28 PM
It varies from state to state based upon which money pool is used to pay the beneficiaries, but it is wise to not to go for it. You will show up as social burden at the time of adjudication and may affect the IOs descision while granting you the AOS approval or not.
Its my 2 cents. You may wanna talk to your attorney before even thinking about filing for such benefits.
Its my 2 cents. You may wanna talk to your attorney before even thinking about filing for such benefits.
girlfriend I am the cutest puppy ever
snathan
03-03 01:29 PM
Well, I am not a fake profile. What happened to us is real. That is what the guy told us. He was basing his decision in the fact that the original company which filed for the LC was no longer in business and that they created a new company. Reality is that they only changed the company's name but they still do the same and have same employees. We believe he didn't want to ask his new partner about signing the I-140 petition. That is our guess.
Honestly, we disconnected ourselves from the whole thing, we were really depressed that after waiting for 5 years we finally got the LC approved and then we got that response. That is why I am looking for help in the forum, I really disconnected myself from the whole process and was not sure how have things changed since in terms of new immigration policies etc etc.
What ever it is...you need to file I-140 within 180 days of approvel. Its two years and gone.
Honestly, we disconnected ourselves from the whole thing, we were really depressed that after waiting for 5 years we finally got the LC approved and then we got that response. That is why I am looking for help in the forum, I really disconnected myself from the whole process and was not sure how have things changed since in terms of new immigration policies etc etc.
What ever it is...you need to file I-140 within 180 days of approvel. Its two years and gone.
hairstyles HE IS THE CUTEST PUPPY YOU
cygent
06-10 07:44 PM
Hi diptam,
Don't forget, if you filed in PERM, your labor might be <365 days.
I'm confused - Everyone who has a 140 is supposed to have a Labor and very likely that will be more than 365 days old. So why do anyone need 140 approval in that sense ?
http://immigrationvoice.org/forum/showthread.php?t=19534
Don't forget, if you filed in PERM, your labor might be <365 days.
I'm confused - Everyone who has a 140 is supposed to have a Labor and very likely that will be more than 365 days old. So why do anyone need 140 approval in that sense ?
http://immigrationvoice.org/forum/showthread.php?t=19534
shreekhand
07-29 11:23 AM
Nowhere did I say I am not sure. In fact I am as sure as it can get :)
The original poster is talking about adjusting status to F-1 but not already being on F-1. Understand that difference here.
For FYI: If one is already on F-1 and applies for I-485 he/she is no longer on F-1 for all practical purposes but in a "period of stay as authorized by the attorney general". In such a case he/she can anyways use a EAD but have to have an AP while re-entering and continue studying as usual.
Note that F-1 and applied for I-485 is a highly debatable topic amongst the legal fraternity.
If you are not sure, don't give untrue info!! His F1 will be unaffected until and when he starts using EAD. He will not be able to re-enter on F1, but as long as he does not use EAD he can maintain this status. To re-enter he will need to use AP and at that point he is no longer in F1.
Also, once you file I485, there is no problem going to school as long as he maintains the job he was originally sponsored for.
The original poster is talking about adjusting status to F-1 but not already being on F-1. Understand that difference here.
For FYI: If one is already on F-1 and applies for I-485 he/she is no longer on F-1 for all practical purposes but in a "period of stay as authorized by the attorney general". In such a case he/she can anyways use a EAD but have to have an AP while re-entering and continue studying as usual.
Note that F-1 and applied for I-485 is a highly debatable topic amongst the legal fraternity.
If you are not sure, don't give untrue info!! His F1 will be unaffected until and when he starts using EAD. He will not be able to re-enter on F1, but as long as he does not use EAD he can maintain this status. To re-enter he will need to use AP and at that point he is no longer in F1.
Also, once you file I485, there is no problem going to school as long as he maintains the job he was originally sponsored for.
LostInGCProcess
01-08 12:54 PM
LostInGCProcess, Since you used AP to enter do you now loose your H1 status? just curious to know.
I read in other blogs that your status would be AOS if you enter using AP and not H1-B. If you need to retain H1-b then your I-94 needs to be stamped as that at the port of entry.
Any comments......
No. One can continue to work on H1 if its the same company.
I read in other blogs that your status would be AOS if you enter using AP and not H1-B. If you need to retain H1-b then your I-94 needs to be stamped as that at the port of entry.
Any comments......
No. One can continue to work on H1 if its the same company.
No comments:
Post a Comment