solientblack
Apr 26, 09:54 AM
re-did the DFU mode steps. iTunes came up again and said "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Steps I used just so everyone knows what I am doing.
1- Phone is off already, so no need to power it down.
2- Held Home and Sleep keys for 10 seconds WITH iTunes open, continuing to hold the Home button until iTunes gave me that popup box with the "iTunes has detected..."
3- Hit restore, it attempts to do so, and about 2-3 minutes later it gives me that 1604 error message. When it first starts the restoration process the screen flashes white then an Apple logo appears, and has the circular loading icon at the bottom for about 5 seconds and it powers down again. Then I get that error a few minutes later as i mentioned just before.
It is in DFU mode. The screen is blank, nothing is there.
edit: I even tried the SHIFT, then click Restore button just to try everything once. Same process happens that I mentioned in step 3.
edit2: updating iTunes to the latest version and trying again., same message even with new iTunes and a new computer, new usb port, and even a new usb cable.
Steps I used just so everyone knows what I am doing.
1- Phone is off already, so no need to power it down.
2- Held Home and Sleep keys for 10 seconds WITH iTunes open, continuing to hold the Home button until iTunes gave me that popup box with the "iTunes has detected..."
3- Hit restore, it attempts to do so, and about 2-3 minutes later it gives me that 1604 error message. When it first starts the restoration process the screen flashes white then an Apple logo appears, and has the circular loading icon at the bottom for about 5 seconds and it powers down again. Then I get that error a few minutes later as i mentioned just before.
It is in DFU mode. The screen is blank, nothing is there.
edit: I even tried the SHIFT, then click Restore button just to try everything once. Same process happens that I mentioned in step 3.
edit2: updating iTunes to the latest version and trying again., same message even with new iTunes and a new computer, new usb port, and even a new usb cable.
ericstjohn
Apr 27, 10:00 PM
Hi. I'm wondering if mixing and matching even Apple production apps affects their compatibility? Moving "up" to a Mac has been a bubble-buster since I discovered the dark side of legacy software and machines in an "upgraded to Intel" world.:mad:
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
3777
Sep 9, 01:49 AM
........is that some of the hardware, even 2 or 3 years old, can do anything any new system can do. My 400mhz iMac DV runs Photoshop pretty damn well, sure it doesn't launch in .00003 seconds, but I can hanle the .5 second delay...... I just ordered a dual ghz G4 quicksilver, and I have no doubt that will be even faster then my Athalon XP2100+ ..........and while both of these systems are now considered "outdated" ........if my old iMac dv can handle most of today's software, I can just imagine what this supposedly outdated Quiclksilver I'm getting is going to do. :confused:
There is always a race for the latest and greatest, but I think systems have become so powerful that anything bought in the past year or so will now be viable for many years to come. Kind of like cars...... dramatic changes in the first 30-40 years........ but progress kind of leveled off after that....... or at least slowed to a point where a 20-30 year old vehicle could still operate on a highway without a problem......sort of like my mint 1980 Jeep CJ7:cool:
There is always a race for the latest and greatest, but I think systems have become so powerful that anything bought in the past year or so will now be viable for many years to come. Kind of like cars...... dramatic changes in the first 30-40 years........ but progress kind of leveled off after that....... or at least slowed to a point where a 20-30 year old vehicle could still operate on a highway without a problem......sort of like my mint 1980 Jeep CJ7:cool:
notjustjay
Jan 28, 10:30 PM
Darnit. I want to do this too, but I no longer have the Windows machines, only a 20-some megabyte outlook.pst file.
alansmallen
Oct 26, 01:54 PM
Already in line. First one!!!! Kid with the fro.
4JNA
Apr 10, 07:36 PM
i've got one for you, but mine is version '9.0.4' instead of '9.2.2' like the link above. also have the matching 'Software Restore' disc, and an 'iMac Applications' disc also stamped but looks to be later as it's a lighter shade of gray. i know that i used the disc to install 9.0.4 on a b&w g3, so this should work for you.
i've no use for them, if you want them, pm you mailing address and i'll slap a couple stamps on them and send them on. best of luck with the restore project.
i've no use for them, if you want them, pm you mailing address and i'll slap a couple stamps on them and send them on. best of luck with the restore project.
d4nn0
Dec 16, 04:51 PM
http://www.ss64.com/osx/
maybe you will find a bit more functionality here :D
http://www.macdevcenter.com/pub/a/mac/2001/12/14/terminal_one.html
this is helpful if you've never used terminal before
maybe you will find a bit more functionality here :D
http://www.macdevcenter.com/pub/a/mac/2001/12/14/terminal_one.html
this is helpful if you've never used terminal before
Pez555
Apr 11, 05:50 AM
power support makes by far the best dry install protectors out there. I too don't like wet install kits, and all other dry installs besides power support are less sturdy...often having tears in the protector before you even install it
Free Happy Birthday Wallpapers
Happy Birthday Wallpapers #1
Photos wallpapers of happy
Happy Birthday Animated
stock vector : Happy Birthday
Happy Birthday Wallpaper
HAPPY BIRTHDAY
:) HaPpY bIrThDaY tO SaMmY.
Idrodo, Happy Birthday!
Happy Birthday Wishes For Boss
Happy Birthday - irthday
Bond007
Jun 29, 11:39 AM
Yeah. under the iChat prefs. it says 'mic enabled'. I guess i'll have to try a self powered mic, because I know this mic i have works, i tried it out on my roommates PC.:confused:
Another quick question, does anyone know if any USB camera (for net chat) will work with the Powermac? Or do i need something special for that as well>?:confused:
thanks.
Another quick question, does anyone know if any USB camera (for net chat) will work with the Powermac? Or do i need something special for that as well>?:confused:
thanks.
QuarterSwede
Apr 24, 03:16 PM
One of the many things I don't like about this new feature is that when I'm scrolling down a thread, the scrolling stops wherever there's an imbedded video. To avoid this, I have to make sure the pointer is on the side of the thread, not in the middle, where the video would appear.
You can keep scrolling with YouTube5 extension if you're using Safari. I'm amazed at how much better the experience is with it installed. Google ought to be ashamed.
You can keep scrolling with YouTube5 extension if you're using Safari. I'm amazed at how much better the experience is with it installed. Google ought to be ashamed.
PixelOz
Jan 3, 10:53 PM
Regenerating Nostalgia - Apple Wallpaper HD
This is a wallpaper that I did in Blender 3D as a tribute to the golden days of computing in the 80s when computers still had limited colors and sound and when they still had limited multimedia capabilities but they were starting to move very fast in that direction.
Those were the days when personal computers were starting to move into the mainstream which led to their eventual acceptance in the 90s as another household item so the pretty logo may bring back some fond memories for some people.
It's in many resolutions from 1024 x 768 all the way to 2560 x 1600 pixels in several different aspect ratios like 4:3, 16:10, 16:9, etc. and I also adapted it to 4:6 ratio IPhone format with 320 x 480 resolution and also 640 x 960 resolution. I used very little compression to preserve a higher quality. The IPhone versions were cropped from the high res render so they are not as optimal but they still look a bit good and they also have the old Apple letters logo in them.
I wanted to do something in 3D with a pseudo sci-fi theme cause I like sci-fi a lot. It was started in Blender 2.49b and finished in Blender 2.5x (about the second half of the work) and one of the reasons that I moved it to the new Blender fast was because it had a much faster renderer and I was planing to use the internal Blender renderer only and see what it could do cause it has become quite capable and one can get pretty decent results with it with a little bit of effort.
It took quite a while to render (like a day and a half) even on a i7 2.66 Ghz CPU with all 8 threads cause I rendered it in very high resolution and it uses ambient occlusion and quite a few lights with many samples. It also has some post processing in Photoshop CS4 for some glow effects and a bit of correction of color and light in some areas.
So there it is, I hope that some people from the old school of computing and/or sci-fi fans like me and others like it. You can modify it as long as it is for your own personal use.
You can download it from here:
Deviantart:
http://fav.me/d36deof
Mediafire:
http://www.mediafire.com/file/gvfcwrdz7c3o2i7/RegeneratingNostalgia-AppleWallpaperVer1-0.zip
This is a wallpaper that I did in Blender 3D as a tribute to the golden days of computing in the 80s when computers still had limited colors and sound and when they still had limited multimedia capabilities but they were starting to move very fast in that direction.
Those were the days when personal computers were starting to move into the mainstream which led to their eventual acceptance in the 90s as another household item so the pretty logo may bring back some fond memories for some people.
It's in many resolutions from 1024 x 768 all the way to 2560 x 1600 pixels in several different aspect ratios like 4:3, 16:10, 16:9, etc. and I also adapted it to 4:6 ratio IPhone format with 320 x 480 resolution and also 640 x 960 resolution. I used very little compression to preserve a higher quality. The IPhone versions were cropped from the high res render so they are not as optimal but they still look a bit good and they also have the old Apple letters logo in them.
I wanted to do something in 3D with a pseudo sci-fi theme cause I like sci-fi a lot. It was started in Blender 2.49b and finished in Blender 2.5x (about the second half of the work) and one of the reasons that I moved it to the new Blender fast was because it had a much faster renderer and I was planing to use the internal Blender renderer only and see what it could do cause it has become quite capable and one can get pretty decent results with it with a little bit of effort.
It took quite a while to render (like a day and a half) even on a i7 2.66 Ghz CPU with all 8 threads cause I rendered it in very high resolution and it uses ambient occlusion and quite a few lights with many samples. It also has some post processing in Photoshop CS4 for some glow effects and a bit of correction of color and light in some areas.
So there it is, I hope that some people from the old school of computing and/or sci-fi fans like me and others like it. You can modify it as long as it is for your own personal use.
You can download it from here:
Deviantart:
http://fav.me/d36deof
Mediafire:
http://www.mediafire.com/file/gvfcwrdz7c3o2i7/RegeneratingNostalgia-AppleWallpaperVer1-0.zip
rockyroad55
May 5, 11:36 PM
I'd say go with the 13". You can use the extra cash to put in a SSD and more RAM. Makes the computer EXTREMELY fast when opening up applications. It doesn't sound like you are doing anything graphics heavy unless when it comes to your physics work.
Also, you could use the money to get a cinema display off craigslist or something so when you come home, you can attach it to the big boy. :)
I'm majoring in marketing btw and I don't see the difference to econ to be that much. But, physics is something else. Ask someone on College Confidential for help with that!
Also, you could use the money to get a cinema display off craigslist or something so when you come home, you can attach it to the big boy. :)
I'm majoring in marketing btw and I don't see the difference to econ to be that much. But, physics is something else. Ask someone on College Confidential for help with that!
mzd
Feb 1, 10:50 AM
Benevento/Russo Duo
Godspeed You! Black Emperor
Medeski Martin & Wood
John Zorn's Masada
Godspeed You! Black Emperor
Medeski Martin & Wood
John Zorn's Masada
furcalchick
Oct 26, 07:04 PM
rats, i didn't see anyone there...:(
snart
Feb 21, 08:08 AM
Strange. Works fine for me with the latest firmware jailbroken.
JollyJoeJoe
Apr 23, 10:59 PM
So Im a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
3 drives in RAID0 ? Yikes, anyone of them goes and your machine is out of action. RAID0 offers no fault tolerance as no drives in the array share parity info or are mirrored.
You would most certainly see a benefit in a hardware RAID solution, especially if you are going to switch to a RAID level with some redundancy, like RAID5 or RAID10. Also a true hardware RAID takes the processing load off your processors and memory.
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
or Just RAID5 with 3x HDD's and partition the RAID volume.
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
I would go with a 6G controller so as to take advantage of new fast 6G SSD's etc.
nanofrog is the RAID-whizz around here and I am sure he would be able to suggest something for you.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
3 drives in RAID0 ? Yikes, anyone of them goes and your machine is out of action. RAID0 offers no fault tolerance as no drives in the array share parity info or are mirrored.
You would most certainly see a benefit in a hardware RAID solution, especially if you are going to switch to a RAID level with some redundancy, like RAID5 or RAID10. Also a true hardware RAID takes the processing load off your processors and memory.
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
or Just RAID5 with 3x HDD's and partition the RAID volume.
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
I would go with a 6G controller so as to take advantage of new fast 6G SSD's etc.
nanofrog is the RAID-whizz around here and I am sure he would be able to suggest something for you.
seubjoh
Mar 23, 12:32 PM
Ya Im having trouble finding a base install thats not an update. Any help? Thanks for the speedy responses guys I appreciate it
jessica.
Jun 30, 07:14 AM
Happened 2 years ago as well.
http://forums.macrumors.com/showthread.php?t=556385
http://forums.macrumors.com/showthread.php?t=556385
ClassicMac247
Jan 14, 07:21 PM
Hard to say but its not like I get free gifts on january 15th, so i have to go with holidays in that respect.
xolmusic
Dec 28, 03:36 PM
I just bought a used IMAC g5
Can re-installing the OS too many times on a imac g5 , add wear and tear to the HARDDRIVE?
also, when you erase and re-install your OS does it take from the amount of GIG space, versus just leaving it alone and deleteing all the files manually?
Can re-installing the OS too many times on a imac g5 , add wear and tear to the HARDDRIVE?
also, when you erase and re-install your OS does it take from the amount of GIG space, versus just leaving it alone and deleteing all the files manually?
McGilli
Mar 3, 09:23 PM
I doubt that the iPad 2 will ship with 4.2.1 Just because the GM was released to developers today doesn't mean that apple hasn't been sitting on it for a week or two.
We can hope though.....
We can hope though.....
tangerineyum
Dec 6, 02:55 PM
It's not myspace so much folks as it is all the relatively novice computer users dumping all sort of odd code into their page. WMP is a problem simple because we dont have the latest version windows user have, the easiest thing to do is go to the security tab in safari preferences and un check enable plugins, since ive started that ive not had a single myspace crash.
superbovine
Nov 27, 02:46 PM
Are you trying to ftp to a windows box with firewall enabled, but not configure properly for ftp? That is exactly what happens.
citizenzen
Mar 4, 09:36 PM
Hi folks...
[flying blind]
Could you post the photo so we can see what you're talking about?
[/flying blind]
[flying blind]
Could you post the photo so we can see what you're talking about?
[/flying blind]
No comments:
Post a Comment